Paste your Google Webmaster Tools verification code here

1927 Chevrolet Six Speed

IMG_6006_small

1927 Chevrolet Six Speed Mine Haulage Vehicle

IMG_6002 - Copy_small

Six Speed Gearbox setup

IMG_6005_small

Fully Air Conditioned Driving position

In sourcing suitable parts for the restoration for our Chevrolet Touring Car, many items where purchased from all corners of the Island. Possibly the most interesting was this road registered 1927 Chevrolet Six Speed Hauler, which had been used for pulling diggings from a mine, in the north of the state. The original 1927 engine and 3 speed gearbox drove through a Dodge 3 speed gearbox, into a Dodge rear diff housing and wheels. The original 27  front suspension had been retro fitted with later model wheels and tyres, but still no brakes. Fuel system had been changed to gravity from a BSA motorcycle fuel tank fitted to the left hand chassis rail, which also provided a good secure mounting spot, for the one and only, Essex Spreadlite Headlamp. A lonely Chevy oil gauge hung from the steering column, whilst the original wooden steering wheel was long gone, but it had been replaced, by a roughly cut circular steel band, woven and wound with a thick sizal rope. The single exhaust faced forward, possibly in an effort to keep heat from setting fire to the wooden beams that supported the broken and bent chassis rails, and also supporting the Dodge gearbox. This “Road Registered” (as it had to cross a public road) Chevrolet had the allusive horn button, steering wheel and spark and throttle levers that I required, so all in all a good purchase.

(Author Alan Smith)

5 comments

  1. admin - 22/09/2013 12:47 pm

    Love this story. Even more as I own a 27 Chev. One question: Wouldn’t two 3 speed gear boxes give 9 forward 2 reverse? great contraption

    Reply
    • Gary - 10/03/2015 12:30 pm

      Hi
      I don’t know if this is the same car but many years ago I can remember a vehicle just like this with the two gearboxes
      It was based at the Marawah pub if I remember correctly and was used for towing out bogged vehicles on the then sand tracks around there and the Arthur river tracks
      I can remember walking along (slowly) next to it towing a car It was in first gear in both gearboxes and revving it’s head off at slow walking speed

      Reply
  2. Ellis French - 22/09/2013 2:28 pm

    Should have kept the rego going….lol

    Reply
  3. admin - 22/09/2013 6:36 pm

    Would be an intteresting club car.

    Reply
  4. Roger Grubert - 23/10/2013 10:18 am

    Who said you can’t make a silk purse from a sow’s ear?
    Great job, well done Allan! – I know what this junk now looks like.

    Grubwit.

    Reply

Reply to Ellis FrenchCancel reply